BG95 NB-IoT/CAT M1/GPRS/GNSS Development Board W/Arduino interface Works W/STM32 Discovery Kit IoT Node

Name: BG95 NB-IoT/CAT M1/GPRS/GNSS Development Board W/Arduino interface Works W/STM32 Discovery Kit IoT Node
Brand: JTOKEN Official Store
SKU: TBBG95BOARD
Price: 156.57 USD
Availability: InStock

Product variants

$156.57 USD

Sold out

Quantity

Introduction

TB-BG95-Board is a NB-IoT/CAT M1/GPRS/GNSS development Board with Arduino interface. Its physical size is 82.4mm × 68.8mm. TB-BG95-Board development Board can be used alone or in conjunction with STM32 Discovery kit IoT node.

Specifications

Power Supply	USB interface: Supply voltage range: 4.75V~5.25V Typical supply voltage: 5.0V Arduino interface: Supply voltage range: 4.75V~5.25V Typical supply voltage: 5.0V
Transmitting Power	21dBm
Temperature Range	Operation temperature range: -35°C ~ +75°C 1) Extended temperature range: -40°C ~ +85°C 2) Storage temperature range: -40°C ~ +90°C
USIM Interface	Support 1.8V external USIM card
USB Interface	Used to switch the power supply mode of development board. Support three UART ports. Main USB Serial port: Used for AT command communication and data transmission. Default is 115200 BPS. Can be used for AT command transmission and data transmission, support RTS and CTS hardware flow control. Debug USB Serial port: Used for firmware debugging Default baud rate: 115200bps GNSS serial port： Default support 115200 BPD for GNSS data and NMEA sentence output.
RESET Button	Used to reset BG95 module
PWRKEY Button	Used for power on and off BG95 module
Physical Characteristics	Size: (82.4±0.15)mm × (68.8±0.15)mm
Firmware Upgrade	Firmware upgrade via main USB port or DFOTA
Antenna Interface	50Ω characteristic impedance

NOTE

1) Within operation temperature range, the module is 3GPP
2) Within extended temperature range, the module remains the ability to establish and maintain an SMS*, data transmission, etc. There is no unrecoverable malfunction. There are also no effects on radio spectrum and no harm to radio network. Only one or more parameters like Pout might reduce in their value and exceed the specified tolerances. When the temperature returns to the normal operating temperature levels, the module will meet 3GPP specifications again.
“*” means under development.

Reviews